Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to "Read this first!" ( x page 4).
Attaching the power cord
1)
Pinch the both sides of the power cord safety hook, making it slightly deformed. Place it into the position as
shown in the blow to make it align with the holes on the both sides of the power connector.
2)
Release the fingers, making the power cord safety hook in place and the hook in the bottom position.
3)
Push the connector all the way into the AC IN terminal ensuring that the shape of the connector matches that
of the terminal. Push the hook on the bottom, and make it up, until you can't push it.
4)
Make sure that the power cord safety hook is pushed up in place, otherwise the power cord may fall off.
34 - ENGLISH
Chapter 3 Basic Operations — Switching on/off the projector