Initial setting (display language)
Select the language to show on the screen.
After the initial setting completed, you can change the display language from the [LANGUAGE] menu.
Press asqw to select the display language.
1)
2)
Press the <ENTER> button to proceed to the initial setting.
Initial setting (projector setting)
Set each item.
Press as to select an item.
1)
Item
[PROJECTION METHOD]
[SCREEN FORMAT]
[SCREEN POSITION]
[STANDBY MODE]
Press qw to switch the setting.
2)
3)
Press the <ENTER> button to proceed to the initial setting.
Chapter 3 Basic Operations — Switching on/off the projector
ENTER
SELECT
Set [PROJECTION METHOD] depending on the installation mode. For details,
refer to "Installation mode" ( x page 26).
After the initial setting is completed, you can change the setting from the
[PROJECTOR SETUP] menu → [PROJECTION METHOD].
Set the screen format (aspect ratio) and display position of the image. After the
initial setting is completed, you can change the settings of each item from the
[DISPLAY OPTION] menu → [SCREEN SETTING].
Set the display position of the image. After the initial setting is completed, you
can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING].
Set the operation mode during standby. The default setting is [ECO] that keeps
the power consumption low during standby. If you want to use the network
function during standby, it can be set to [NORMAL]. After the initial setting is
completed, you can change the setting from the [PROJECTOR SETUP] menu
→ [ECO MANAGEMENT] → [STANDBY MODE].
AUTO
4:3
NORMAL
RETURN
Description
Page
26, 71
65
65
73
ENGLISH - 37