Connecting Example: Av Equipment - Panasonic PT-SW280A Operating Instructions Manual

Connecting example: AV equipment

Video deck (TBC built-in)
Video deck (TBC built-in)
Attention
f Always use one of the following when connecting a VCR.
g A VCR with built-in time base corrector (TBC)
g A time base corrector (TBC) between the projector and the VCR
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the
projector and the external devices.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, images may be interrupted or may not be displayed.
f The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion
cable, but some devices may not project the image properly or function properly.
f The projector does not support VIERA Link (HDMI).
f If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio.
f When Y/C signals are input, please use the optional D-SUB - S Video conversion cable (Model No.: ET-ADSV).
Chapter 2 Getting Started — Connecting
D-SUB - S Video
conversion cable
S-video
(ET-ADSV)
cable
Blu-ray disc player
ENGLISH - 31