[Filter Counter]; [Initialize All] - Panasonic PT-SW280A Operating Instructions Manual

[FILTER COUNTER]

You can check the filter usage time and set the cleaning cycle for the air filter. Also, reset the filter usage time.
Press as to select [FILTER COUNTER].
1)
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Setting [TIMER]
Sets the cleaning cycle (time) if you want to clean the air filter periodically. When the time reaches, an alert
message "FILTER COUNTER has reached the set time." for filter cleaning is displayed on the projected screen.
Press as to select [FILTER COUNTER].
1)
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
Press as to select [TIMER].
3)
Press qw to switch the setting of the timer.
4)
f The items will switch each time you press the button.
[OFF]
[1 000 H] ~ [5 000 H]
Resetting [FILTER COUNTER]
Press as to select [FILTER COUNTER].
1)
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
Press as to select [FILTER COUNTER RESET].
3)
4)
Press the <ENTER> button.
f The [FILTER COUNTER RESET] screen is displayed.
Press qw to select [OK] and then press the <ENTER> button.
5)

[INITIALIZE ALL]

Return various setting values to their factory default settings.
Press as to select [INITIALIZE ALL].
1)
2)
Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
When the confirmation screen is displayed, press qw to select [OK] and then press the <ENTER> button.
3)
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF] screen will be displayed.
4)
Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when the projector is switched on the next time.
Note
f The projector will enter the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK] cannot be
returned to the factory default values.
For details about the initialization of [NETWORK], please refer to [NETWORK] → [INITIALIZE]. (
76 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the using time of the filter.
Sets the cleaning cycle (time) for the air filter.
Resets the filter usage time.
Sets when you do not want to display the set time reaching alert message.
Sets the timer in 1 000 hour increments from 1 000 to 5 000 hours.
Æ
page 82)