Table of Contents
Advertisement
Projecting
Check the external device connection ( x page 30), power cord connection ( x page 34), and switch on the
projector ( x page 36) to start projecting. Select the image for projection, and adjust appearance of the projected
image.
Selecting the input signal
The input for projection can be switched. Method to switch the input is as follows.
f Press the input selection buttons on the remote control and directly specify the input to project.
f Press the <INPUT SELECT> button on the control panel to display the input selection screen and select the
input to project from the list.
Switching the input directly via remote control
The input for projection can be switched directly by pressing the input selection button on the remote control.
Press the input selection (<COMPUTER>, <HDMI>, <VIDEO>, <MEMORY VIEWER>, <WIRELESS>)
buttons.
f Switches the input, the input guide of the selected input terminal displayed on the top right of the projection
screen.
<COMPUTER>
<HDMI>
<VIDEO>
<MEMORY VIEWER>
<WIRELESS>
Attention
f Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back.
f Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →
[ASPECT]. ( x page 60)
40 - ENGLISH
Chapter 3 Basic Operations — Projecting
Remote control
Switches the input to COMPUTER. If one input is already selected, it will be switched to the other
input. The image of the signal being input in the <COMPUTER IN> terminal is projected.
Switches the input to HDMI. The image of the signal being input in the <HDMI IN> terminal is
projected.
Switches the input to VIDEO. The image of the signal being input in the <VIDEO IN> terminal is
projected.
Switches the input to MEMORY VIEWER.
Switches the input to WIRELESS. Need the wireless adapter into the <VIEWER / WIRELESS>
terminal.
Control panel
Advertisement
Table of Contents
