Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Using the presentation timer function
The presentation timer function can be operated.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
button
1)
Press the <P-TIMER> button.
f The count is started.
f The elapsed time or the remaining time is displayed at the bottom right of the projected image.
2)
Press the <P-TIMER> button again.
f The count is stopped.
3)
Press the <P-TIMER> button again.
f The count is resumed.
Note
f The presentation timer is ended by holding the <P-TIMER> button down for at least three seconds.
f For details such as presentation timer function settings, refer to [DISPLAY OPTION] menu → [P-TIMER] ( x page 67).
Using the <FUNCTION> button
Some operations in the menu can be assigned to the <FUNCTION> button on the remote control so that it can be
used as an easy shortcut button.
button
1)
Press the <FUNCTION> button.
To assign functions to the <FUNCTION> button
Press the <MENU> button on the control panel or the remote control to display the menu items (main menu,
1)
sub menu, or details menu) you want to assign.
f Refer to "Navigating through the menu" ( x page 48) for the operation of the on-screen menu.
2)
Press and hold the <FUNCTION> button for three seconds or more.
Note
f After settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in [ASSIGNED
FUNCTION] of the operation guide under the menu.
f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] ( x page 74) when deallocating
functions.
ENGLISH - 45
Advertisement
Table of Contents
