Table of Contents
Advertisement
Power supply
Operating range
Remote
control
Weight
Dimensions
*1 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 Average value. Weight varies for each product.
*3 If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [NORMAL], [LAMP POWER] changes to [ECO] forcibly to protect the projector
when the operating environment temperature becomes 35 °C (95 °F) or higher.
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Terminal
<COMPUTER IN> terminal
<VIDEO IN> terminal
<HDMI IN> terminal
<AUDIO IN> terminal
<SERIAL IN> terminal
<VIEWER/WIRELESS> terminal
r Applicable scanning frequency
Refer to "List of compatible signals" ( x page 112) for the types of video signals that can be used with the
projector.
For video signal
For Y/C signal
For RGB signal
For YC
C
/YP
P
signal
B
R
B
R
For HDMI signal
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Chapter 7 Appendix — Specifications
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Approx.7 m (22'11-5/8") (when operated directly in front of signal receiver)
63 ] (2.22 ozs.) (including batteries)
Width: 44 mm (1-23/32"), Length: 105 mm (4-1/8"), Height: 20.5 mm (13/16")
1 set high-density D-Sub 15 p (female)
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
RGB signal
SYNC/HD
VD
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP
P
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
R
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
Y/C signal
1 set, pin jack 1.0 V [p-p] 75 Ω
1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
Audio signal
1 sets, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
1 set, D-Sub 9 p, RS-232C compliant, for computer control
USB connector (type A x 1, output DC 5 V, 500 mA maximum)
Memory Viewer / Wireless module (Model No.: ET-WML100E) compatible
Horizontal: 15.73 kHz Vertical : 59.94 Hz, Horizontal: 15.63 kHz Vertical : 50 Hz
Horizontal: 15.73 kHz Vertical : 59.94 Hz, Horizontal: 15.63 kHz Vertical : 50 Hz
f Displayable resolution: 640 x 400 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
f Displayable resolution: 480i/576i to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
f Displayable resolution for movie-based signals: 480i/576i
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
TTL high impedance, automatic positive/negative polarity compatible
TTL high impedance, automatic positive/negative polarity compatible
*1
to 1 920 x 1 080
: 0.7 V [p-p] 75 Ω
P
B
R
ENGLISH - 115
Advertisement
Table of Contents
