Table of Contents
Advertisement
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
[Input IP address]
Enter the IP address of the server to be tested.
2
[Submit]
Executes the connection test.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1
[LAMP POWER]
Selects the [LAMP POWER] setting.
2
[AUTO POWER SAVE]
Sets to [ON] when setting [AMBIENT LIGHT DETECTION],
[SIGNAL DETECTION] and [AV MUTE DETECTION].
3
[AMBIENT LIGHT DETECTION]
Selects enable ([ON])/disable ([OFF]) of the environmental
luminance interlock function.
4
[SIGNAL DETECTION]
Selects enable ([ON])/disable ([OFF]) of the no signal interlock
function.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] ( x page 72) on the projector.
Chapter 5 Operation of Function — Web control function
1
2
3
Example of display when the connection has succeeded
4
Example of display when the connection has failed
5
[AV MUTE DETECTION]
Selects to enable ([ON])/disable ([OFF]) of the AV mute
detection function.
6
[POWER MANAGEMENT]
Selects the power consumption mode.
7
[TIMER]
Selects the time that the lamp is turned off when the POWER
MANAGEMENT function is using.
8
[Submit]
Updates the settings.
1
2
3
4
5
6
7
8
ENGLISH - 97
3
4
Advertisement
Table of Contents
