[Test Pattern] - Panasonic PT-SW280A Operating Instructions Manual

Press qw to switch the item.
4)
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO] ( x page 73), even if [IN STANDBY MODE] is set to [ON], audio
cannot be output during standby.
f When [IN STANDBY MODE] is set to [ON], the audio output is interrupted during the cooling period after the power is turned off, but this is
not a malfunction.
Setting audio input selection
Choose the audio input terminal for each input signal.
Press as to select [AUDIO SETTING].
1)
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
Press as to select one item of [AUDIO IN SELECT].
3)
[HDMI]
[NETWORK]
Press qw to switch the item.
4)
f The sub items will switch each time you press the button.
[HDMI]
[NETWORK]

[TEST PATTERN]

Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input
signal before performing various adjustments.
Press as to select [TEST PATTERN].
1)
2)
Press the <ENTER> button.
f The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
Press qw to switch the test pattern.
3)
f The test pattern will switch each time you press the button.
f When you press the <MENU> button or the <RETURN> button, it will exit the test pattern and return to the
sub menu of [PROJECTOR SETUP].
All white
Color bars (vertical)
Color bars (horizontal)
White cross on the black
background
Black cross on the white
background
Cross hatch
Note
f The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the <FUNCTION> button.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables audio output in the standby mode.
Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL]. At this time,
press the <VOL-> button/<VOL+> button on the remote control or the control panel to adjust the
volume.
Set the audio output when [HDMI] input is selected.
Set the audio output when [NETWORK] input is selected.
Select one item among [HDMI AUDIO IN] or [AUDIO IN].
Select one item among [NETWORK AUDIO IN] or [AUDIO IN].
Select a test pattern so that it is easy to make various adjustments.
ENGLISH - 75