[Security] Menu; [Password]; [Password Change] - Panasonic PT-SW280A Operating Instructions Manual

[SECURITY] menu

On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" ( x page 48) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
Attention
f When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[PASSWORD]

The [PASSWORD] screen is displayed when press the power < v / b > button and turning on the power. When the
entered password is incorrect, the operation will be restricted to the power < v / b > button on the control panel and
on the remote control.
Press as to select [PASSWORD].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f The [PASSWORD] setting is set to [OFF] by the factory default or when [INITIALIZE ALL] in [PROJECTOR SETUP] menu ( x page 76) is
executed.
f Change the password periodically that is hard to guess.
f The security password is enabled after setting [PASSWORD] to [ON] and press the power < v / b > button.

[PASSWORD CHANGE]

Change the security password.
Press as to select [PASSWORD CHANGE].
1)
2)
Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
Press asqw and the number (<0> - <9>) buttons to set the password.
3)
f Up to eight button operations can be set.
4)
Press the <ENTER> button.
5)
Re-enter the password for the confirmation.
6)
Press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.
Consult your dealer for the initialization method.
Chapter 4 Settings — [SECURITY] menu
Disables the security password entry.
Enables the security password entry.
ENGLISH - 77