[Advanced Menu]; [Daylight View]; [Noise Reduction] - Panasonic PT-SW280A Operating Instructions Manual

[ADVANCED MENU]

You can perform more advanced image adjustment.
Press as to select [ADVANCED MENU].
1)
2)
Press the <ENTER> button.
f The [ADVANCED MENU] screen is displayed.
Press as to select one item among [CONTRAST R] ~ [BRIGHTNESS B].
3)
Press qw or the <ENTER> button.
4)
f The individual adjustment screen of items are displayed.
Press qw to adjust the value.
5)
Items
[CONTRAST R]
[CONTRAST G]
[CONTRAST B]
[BRIGHTNESS R]
[BRIGHTNESS G]
[BRIGHTNESS B]

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.
Press as to select [DAYLIGHT VIEW].
1)
Press qw or the <ENTER> button.
2)
f The [DAYLIGHT VIEW] individual adjustment screen is displayed.
Press qw to switch the item.
3)
f The items will switch each time you press the button.
[AUTO]
[ON]
[OFF]
Note
f When [PROJECTION METHOD] ( x page 71) is set to [REAR/DESK] or [REAR/CEILING], [AUTO] cannot be selected.
f When objects, etc. are placed on the top of the projector, the illuminance sensor enters the shadow and the [AUTO] mode may not function
properly.
f When [DAYLIGHT VIEW] is set to [AUTO] or [ON], the [SHARPNESS] cannot be adjusted.

[NOISE REDUCTION]

(Only when the <VIDEO IN> terminal or <COMPUTER IN> terminal is selected)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
Press as to select [NOISE REDUCTION].
1)
Press qw or the <ENTER> button.
2)
f The [NOISE REDUCTION] individual adjustment screen is displayed.
54 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Operation
Press the w button.
Emphasizes red in highlight areas.
Press the q button.
Deemphasizes red in highlight areas.
Press the w button.
Emphasizes green in highlight areas.
Press the q button.
Deemphasizes green in highlight areas.
Press the w button.
Emphasizes blue in highlight areas.
Press the q button.
Deemphasizes blue in highlight areas.
Press the w button.
Emphasizes red in shadow areas.
Press the q button.
Deemphasizes red in shadow areas.
Press the w button.
Emphasizes green in shadow areas.
Press the q button.
Deemphasizes green in shadow areas.
Press the w button.
Emphasizes blue in shadow areas.
Press the q button.
Deemphasizes blue in shadow areas.
The brightness of the installation environment is detected by the luminance sensor, and the vividness
of the image is automatically corrected.
Enables [DAYLIGHT VIEW].
No correction.
Adjustment Adjustment range
-32 ~ +32
-32 ~ +32
-32 ~ +32
-32 ~ +32
-32 ~ +32
-32 ~ +32