Table of Contents
Advertisement
Press qw to switch the item.
3)
f The items will switch each time you press the button.
[OFF]
[ON]
Attention
f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only when the <VIDEO IN> terminal or <COMPUTER IN> terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system to match the input signal.
Press as to select [TV-SYSTEM].
1)
Press qw or the <ENTER> button.
2)
f The [TV-SYSTEM] individual adjustment screen is displayed.
Press qw to select the color system.
3)
f The items will switch each time you press the button.
f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM] or [PAL60].)
[RGB/YP
P
]
B
R
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB] or
[YP
P
] in accordance with the input signal.
B
R
Press as to select [RGB/YP
1)
Press qw or the <ENTER> button.
2)
f The [RGB/YP
P
] individual adjustment screen is displayed.
B
R
Press qw to switch the item.
3)
f The items will switch each time you press the button.
[AUTO]
[RGB]
[YP
P
]
B
R
When the <COMPUTER IN> terminal is selected
f For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input
Select [AUTO] or [RGB]
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
When the <HDMI IN> terminal is selected
f For 525p (480p) and 625p (576p) input
Select [AUTO] or [RGB]
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
Note
f Refer to "List of compatible signals" (
f The signal selection may not function properly depending on connected devices.
Chapter 4 Settings — [PICTURE] menu
No correction.
Enables [NOISE REDUCTION].
P
].
B
R
The sync signal automatically selects the signal [RGB]/[YP
Select it for RGB signal input.
Select it for YP
P
signal input.
B
R
P
].
B
R
P
].
B
R
Æ
page 112) for the types of video signals that can be used with the projector.
P
].
B
R
ENGLISH - 55
Advertisement
Table of Contents
