About Vuemagic Pro - Panasonic PT-SW280A Operating Instructions Manual

About VueMagic Pro

The wireless module (Model No.: ET-WML100E) of the optional accessories is required.
By using still image transfer application software "VueMagic Pro", you can transfer images to the projector when
iPad/iPhone/iPod touch or Android terminals are connected to this projector through the wireless LAN.
Connecting with the VueMagic Pro compatible device
1)
Press the <WIRELESS> button to select [NETWORK].
f Switch to the NETWORK input and the NETWORK input idle screen is displayed.
f Check the login password (a four-digit number that is automatically generated), SSID and the IP address
(wireless LAN) which are displayed on the NETWORK input idle screen.
f You can also press the <INPUT SELECT> button on the control panel to select [NETWORK] in the input
guide.
2)
Choose the SSID of this projector on the wireless LAN setting screen of the connected device, and then
connect the wireless.
3)
Start the VueMagic Pro mobile presenter application of the correspondent VueMagic Pro devices.
4)
Choose the projector name of this projector in the projector list.
f The connection confirmation screen is displayed.
5)
Choose the display position.
f The password entry screen is displayed.
6)
Enter the login password and click [OK].
f The connected device screen is projected on the screen.
Note
f When connecting to the iOS device or Android device, you must install the dedicated application "VueMagic Pro" to the device. For detailed
information, refer to the following web site. (Only in English.)
URL http://vuemagic.pixelworks.com
Disconnecting with the VueMagic Pro compatible device
Close the VueMagic Pro mobile presenter application of the device by clicking the
90 - ENGLISH
Chapter 5 Operation of Function — About VueMagic Pro
.