[Hdmi Signal Level]; [Closed Caption Setting]; Ycbcr Input) - Panasonic PT-SW280A Operating Instructions Manual

[WARNING MESSAGE]
Set the display/hide of the warning message.
Press as to select [ON-SCREEN DISPLAY].
1)
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
Press as to select [WARNING MESSAGE].
3)
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status
such as lamp replacement, temperature warning or filter replacement is detected.

[HDMI SIGNAL LEVEL]

Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image
is not projected correctly.
Press as to select [HDMI SIGNAL LEVEL].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operation instruction of the external
device regarding the output of the external device.
f The displayed signal level is assumed when the input is 30 bits.

[CLOSED CAPTION SETTING]

Set the closed caption.
Selecting the closed caption display
Press as to select [CLOSED CAPTION SETTING].
1)
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
Press as to select [CLOSED CAPTION].
3)
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[ON]
[OFF]
f When [ON] is selected, proceed to Step 5).
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
5)
64 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the warning message.
Hides the warning message.
Sets the signal level automatically.
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN> terminal.
Select when the DVI terminal output of an external device (such as a computer) is connected to the
<HDMI IN> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI IN>
terminal.
(Only for NTSC, 480i YC
Closed captions are displayed.
Closed captions are not displayed.
C input)
B R