Switching Off The Projector - Panasonic PT-SW280A Operating Instructions Manual

Switching off the projector

1)
Press the power <v/b> button.
f The [POWER OFF] confirmation screen is displayed.
Press qw to select [OK], and press the <ENTER> button.
2)
(Or press the power <v/b> button again.)
f Projection of the image will stop, and the power indicator <ON(G) / STANDBY(R)> on the projector body
lights in orange. (The fan keeps running.)
Wait until the power indicator <ON(G) / STANDBY(R)> lights or blinks in red.
3)
Note
f Do not switch on the projector and project images immediately after switching off the projector.
Turning on the power while the lamp is still hot may shorten the life of the lamp.
f For about 90 seconds after the projector is switched off and the luminous lamp cooling is started, the luminous lamp will not light up even if
the power is switched on. In such a case, switch on the projector again after the power indicator <ON(G) / STANDBY(R)> lights in red.
f When the power indicator <ON(G) / STANDBY(R)> lights orange, it indicates the lamp is cooling down, and you cannot open the projector.
Wait until the power indicator <ON(G) / STANDBY(R)> starts to light or blinks in red, switch on the projector again.
Chapter 3 Basic Operations — Switching on/off the projector
ENTER
SELECT
1)
3)
RETURN
1)
2)
ENGLISH - 39