Panasonic PT-SW280A Operating Instructions Manual page 87

Table of Contents

Advertisement

3)
Press the <WIRELESS> button to switch to NETWORK input.
f The network input idle screen is displayed. The login password (a four-digit number that is automatically
generated), PROJECTOR NAME, SSID and IP ADDRESS (WIRELESS) will be displayed in the idle screen.
f LOGIN PASSWORD
f PROJECTOR NAME
f SSID
f IP ADDRESS(WIRELESS)
Attention
f Please do not move or transport the projector while the wireless module is attached. Doing so may cause the wireless module to be
damaged.
f The indicator of the wireless module will be off when the projector is in standby mode, it will light in blue when the power is turned on and it
will blink in blue during wireless communicating.
Please do not remove the wireless module while the indicator is blinking.
f When the power of the projector is turned on and the indicator of the wireless module is not lighting/blinking, please insert the wireless
module to the <VIEWER/WIRELESS> terminal again.
f The [IP ADDRESS (WIRELESS)] is displayed after the power is turned on, please connect network to the projector.
Note
f The settings of the wireless module are as follows. You can access the projector from the web browser to set the values of [SSID], [CHANNEL]
and [ENCRYPTION].
Computer setting
1)
Turn on the computer.
2)
Make the network setting according to your system administrator.
f Please make the network settings for the computer and the projector according to your system
administrator.
3)
Connect to the network that has been set in the projector.
f If you use a computer, click on the task tray
as the SSID that has been set in the projector.
Note
f If you use any wireless LAN connection utility that meets the OS standard, follow the operation instruction of the utility to connect it.
Chapter 5 Operation of Function — Network connections
[SSID]
[CHANNEL]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[ENCRYPTION]
[KEY]
Network input idle screen
LOGIN PASSWORD :
5678
PROJECTOR NAME :
Name1234
SSID :
Panasonic Projector
IP ADDRESS(WIRELESS) :
172.28.120.1
Network Statusxxxx
(xxxx stands for a four-digit number
and varies by each product.)
1
172.28.120.1
255.255.255.0
0.0.0.0
WPA2-PSK(AES)
panasonic
(bottom right of the computer), then select the same name
ENGLISH - 87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-sx320aPt-sx300a

Table of Contents