Displaying The Memory Viewer Screen; Playing The Pictures; Executing The Slide; Termination Of The Memory Viewer - Panasonic PT-SW280A Operating Instructions Manual

Chapter 5 Operation of Function — About Memory Viewer function

Displaying the Memory Viewer screen

1)
Press the <MEMORY VIEWER> button on the remote control or switch the input source to [MEMORY
VIEWER].
f Press the <INPUT SELECT> button on the control panel and select the input source in the Input menu.
2)
Insert the USB memory directly into the <VIEWER/WIRELESS> terminal.
f The standby screen "please press ENTER" is displayed while the USB memory icon is displayed at the lower left of the
screen.
f When the partition are separated in USB memory, several USB icons will be displayed.
3)
Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.

Playing the pictures

It will display a picture when play the picture manually every time.
Press asqw on the remote control to select a file.
1)
2)
Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
Press w to switch to the next picture, press q to return to the previous picture.
3)
4)
Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.

Executing the slide

All pictures in the same folder will play automatically when [SORT ORDER] and [SLIDE TRANSITION EFFECT] and so on of
[MEMORY VIEWER LIGHT] menu are set to the special setting.
Press asqw on the remote control to select a file.
1)
Press the <MENU> button to select the [MEMORY VIEWER LIGHT] → [SET SLIDE].
2)
3)
Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
f Press the <ENTER> button to return to the thumbnail screen.
Note
f If you press the <MENU> button during the slide show, the image will stop and the a menu displays. The playing will continue when the
menu disappears.

Termination of the Memory Viewer

Press asqw to select the thumbnail
1)
2)
Press the <ENTER> button on the remote control.
f Return to the standby screen "please press ENTER".
which is displayed on the upper left corner.
ENGLISH - 85