Making Adjustments And Selections - Panasonic PT-SW280A Operating Instructions Manual

Making adjustments and selections

It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
4)
Adjust the focus of the image roughly. (x page 41)
1)
Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
2)
installation mode. (x page 26)
f Refer to "Navigating through the menu" ( x page 48) for the operation of the menu screen.
Press the <INPUT SELECT> button on the control panel or the input selection (<COMPUTER>, <HDMI>,
3)
<VIDEO>, <MEMORY VIEWER>, <WIRELESS>) buttons on the remote control to select the input signal.
Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 29)
4)
5)
If the input signal is the RGB signal, press the <AUTO SETUP> button.
Adjust the size of the image to match the screen by the zoom lever. (x page 41)
6)
7)
Adjust the focus again by the focus lever.
Note
f When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] in the [PROJECTOR SETUP] menu is
executed, the [INITIAL SETTING] screen is displayed. Refer to "When the initial setting screen is displayed" ( x page 36).
38 - ENGLISH
Chapter 3 Basic Operations — Switching on/off the projector
6)
1) 7)
3)
5)