[Screen Setting] - Panasonic PT-SW280A Operating Instructions Manual

Table of Contents

Advertisement

Setting the closed caption mode
Press as to select [CLOSED CAPTION SETTING].
1)
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
Press as to select [MODE].
3)
f When [CLOSED CAPTION] is set to [OFF], [MODE] cannot be selected.
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[CC1]
[CC2]
[CC3]
[CC4]
Note
f Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed
depending on the connected devices or contents being played back.
f [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
f If [CLOSED CAPTION] is set to [ON], the brightness of image may be changed according to the external devices or the used content of the
closed caption corresponding connection.
f If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [TEXT DISPLAY ] (
is not displayed.
f Closed captions are not displayed when the menu screen is displayed.

[SCREEN SETTING]

Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set
as necessary for the screen in use.
Press as to select [SCREEN SETTING].
1)
2)
Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
Press as to select [SCREEN FORMAT].
3)
Press qw to switch the [SCREEN FORMAT] item.
4)
f The items will switch each time you press the button.
[SCREEN FORMAT]
[16:10]
[16:9]
[4:3]
Press qw to adjust the [SCREEN POSITION].
5)
f The items will switch each time you press the button.
r When [SCREEN FORMAT] is [16:10]
[CENTER]
[HIGH]
[LOW]
r When [SCREEN FORMAT] is [16:9]
[CENTER]
[HIGH]
[LOW]
r When [SCREEN FORMAT] is [4:3]
[CENTER]
[LEFT]
[RIGHT]
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays CC1 data.
Displays CC2 data.
Displays CC3 data.
Displays CC4 data.
Description
The projected aspect ratio is 16:10.
The projected aspect ratio is 16:9.
The projected aspect ratio is 4:3.
The image which aspect ratio is 16:10 will displayed in the center.
The image which aspect ratio is 16:10 will displayed at the top.
The image which aspect ratio is 16:10 will displayed at the bottom.
The image which aspect ratio is 16:9 will displayed in the center.
The image which aspect ratio is 16:9 will displayed at the top.
The image which aspect ratio is 16:9 will displayed at the bottom.
The image which aspect ratio is 4:3 will displayed at the center.
The image which aspect ratio is 4:3 will displayed in the left.
The image which aspect ratio is 4:3 will displayed at the right.
C
signal is input.
B
R
Range when [SCREEN POSITION] is selected
Adjusts the vertical position. (Only for PT-SX320A/PT-SX300A)
Adjusts the vertical position.
Adjusts the horizontal position. (Only for PT-SW280A)
Æ
page 78)
ENGLISH - 65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-sx320aPt-sx300a

Table of Contents