[Function Button]; [Audio Setting] - Panasonic PT-SW280A Operating Instructions Manual

[FUNCTION BUTTON]

The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the
assigned setting.
Releasing assigned function to the <FUNCTION> button
Press as to select [FUNCTION BUTTON].
1)
2)
Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3)
Press the <ENTER> button.
When the confirmation screen is displayed, press qw to select [OK] and press the <ENTER> button.
4)
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, submenu,
or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.

[AUDIO SETTING]

You can perform more detailed setting for Audio.
Adjusting the volume
Press as to select [AUDIO SETTING].
1)
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
Press as to select [VOLUME].
3)
Press qw to adjust the level.
4)
Operation
Press the w button.
Press the q button.
Setting the mute
Press as to select [AUDIO SETTING].
1)
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
Press as to select [MUTE].
3)
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[OFF]
[ON]
Setting the audio output during standby
Press as to select [AUDIO SETTING].
1)
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
Press as to select [IN STANDBY MODE].
3)
74 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Adjustment
Increases the volume.
Decreases the volume.
Audio is output.
Audio is not output.
Range
0 ~ 63