Rgb Format; Back Color Eau; Front/Rear „Sesser; Desk/Ceiling - Panasonic PT-LC75U Operating Instructions Manual

RGB FORMAT LAMP POWER
RGB FORMAT RGB | LAMP POWER HIGH}
EE
This setting is only valid when an This setting changes the lamp
HDTV signal is being input and brightness. When set to
"AUTO Y-PB-PR' is set to OFF. "STANDARD", the luminance of the
lamp is reduced, but the projector
BACK COLOR uses less power, and the operating
BACK COLOR ae | noise is also reduced. This can help
to extend the lamp's operating life. if
using the projector in small rooms
This sets the color which is where high luminance is not
projected onto the screen when no required, it is recommended that
signal is being input to the projector. you set the LAMP POWER to
FRONT/REAR "STANDARD".
FRONT/REAR FRONT LAMP TIME
mur Dali This setting displays the usage time
accordance with the projector NOTE:
setting-up method. E
u f ; € The lamp's operating life varies
Set to "FRONT" when using a depen dino Ed the free
normal reflective screen with the +
projector positioned in front of the conditions (Such aS 1M8 LAMP
screen, and set to "REAR" when PONER setting and me number
using a translucent screen with the obumes INE power v lumed.on
projector positioned behind the and off).
screen.
DESK/CEILING
DESK/CEILING DESK i
4
CEILING )
This setting should be changed in
accordance with the projector
setting-up method.
Set to "DESK" when setting up the
projector on a desk or similar, and
set to "CEILING" when suspending
the projector from the ceiling using
the ceiling bracket which is sold
separately.
37
Advan Operat