About Your Projector; Remote Control - Panasonic PT-SW280A Operating Instructions Manual

About your projector

Remote control

Power < v / b > button ( v standby / b power)
1
Turn the projector on or off. ( x page 36, 39)
Input selection (<COMPUTER>, <HDMI>, <VIDEO>,
2
<MEMORY VIEWER>, <WIRELESS>) buttons
Switches the input signal to project. ( x page 40)
<ENTER> button/ asqw buttons
3
Navigate the MENU display.
4 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
( x page 49)
5 <MENU> button
Open or close the On-Screen Menu. ( x page 48)
6 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. ( x page 24)
7 <FREEZE> button
Used when pausing the image and turning off the audio.
( x page 43)
8 <D.ZOOM->/<D.ZOOM+> button
Zoom in and out the images. ( x page 44)
9 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker ( x page 42)
Attention
f Do not drop the remote control.
f Avoid contact with liquids or moisture.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on the back of the remote
control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f In addition, please read the contents that are related to batteries in the "Read this first!".
20 - ENGLISH
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
9
19
18
17
16
15
14
13
12
11
10
10 <SCREEN ADJ> button
Correct keystone distortion ( x page 43)
11 Number (<1> ~ <6>) buttons
Used for entering an ID number or a password in a multiple
projectors environment.
12 <P-TIMER> button
Operates the presentation timer function. ( x page 45)
13 <AV MUTE> button
Used when temporarily turning off the image and the audio.
( x page 42)
14 <MUTE> button
Used when temporarily turning off the audio. ( x page 42)
15 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
( x page 24)
16 <RETURN> button
Return to the previous menu or cancel the setting.
17 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
( x page 45)
18 <AUTO SETUP> button
Automatically adjusts the image display position while the image
is projected. ( x page 43)
19 Remote control signal transmitter
Caution label at the back of the remote control