Table of Contents
Advertisement
3)
Press the <执行> button.
f The [MEASURED MODE] screen is displayed.
4)
Press as to select [MEASURED DATA].
5)
Press the <执行> button.
f The [MEASURED DATA] screen is displayed.
6)
Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.
7)
Press as to select a color, and press qw to adjust the setting.
f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
8)
Once all the input is completed, press the <菜单> button.
f The [MEASURED MODE] screen is displayed.
9)
Press as to select [TARGET DATA].
10) Press the <执行> button.
f The [TARGET DATA] screen is displayed.
11) Press as to select a color and press qw to input coordinates for desired colors.
f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
12) Once all the input is completed, press the <菜单> button.
Note
f Colors are not displayed properly when target data is a color outside the region of this projector.
f Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.
f The [AUTO TESTPATTERN] setting will change in conjunction with the setting in the [ADVANCED MENU] menu → [EDGE BLENDING] →
[ON]/[USER] → [AUTO TESTPATTERN].
f When using a colorimeter or similar instrument to take measurement, measure the colors displayed in [AUTO TESTPATTERN].
f It is recommended to enter the value between [1000] and [32768] in [Y(RELATIVE)] of [WHITE] in the [MEASURED DATA] screen. For
each value ([Y(RELATIVE)] of [BLACK], [RED], [GREEN], and [BLUE]), enter the relative value for the [Y(RELATIVE)] value of [WHITE]
based on the luminance (Y) of each color measured using the colorimeter.
f A difference in the color coordinates of target data and measurement value obtained from an instrument may occur for certain instrument
and measurement environment used.
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1)
Press as to select [COLOR CORRECTION].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[USER]
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.
Set as necessary for the screen in use.
1)
Press as to select [SCREEN SETTING].
2)
Press the <执行> button.
f The [SCREEN SETTING] screen is displayed.
3)
Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
100 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Standard setting.
For each signal format of RGB signal and YC
magenta, and yellow can be adjusted and registered. Press the <执行> button and set the details.
Adjustment is possible within the range of -31 to +31.
C
/YP
P
signal, six colors of red, green, blue, cyan,
B
R
B
R
Advertisement
Table of Contents
