[Advanced Menu] Menu; [Digital Cinema Reality]; [Blanking] - Panasonic PT-EZ770 Series Operating Instructions Manual

[ADVANCED MENU] menu

On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from
the sub-menu.
Refer to "Navigating through the menu" (x page 55) for the operation of the menu screen.
f After selecting the item, press asqw to adjust.

[DIGITAL CINEMA REALITY]

You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i
signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[30p FIXED]
[25p FIXED]
Note
f In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p
FIXED]. (Vertical resolution will degrade.)

[BLANKING]

You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while an
image from the VCR or other devices are projected.
1) Press as to select [BLANKING].
2) Press the <ENTER> button.
f The [BLANKING] adjustment screen is displayed.
3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
4) Press qw to adjust the blanking width.
Blanking correction
Top of the screen
Bottom of the
screen
70 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Performs automatic detection and cinema processing. (Factory default)
Does not perform cinema processing.
Only during 480i or 1080/60i
signal input
Only during 576i or 1080/50i
signal input
Item Operation
Press the q
button.
[UPPER]
Press the w
button.
Press the w
button.
[LOWER]
Press the q
button.
Performs forced cinema processing (2:2 pulldown).
Adjustment
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves upward.
The blanking zone
moves downward.
Range of adjustment
PT-EZ770T: Top to bottom
0 - 599
PT-EW730T: Top to bottom
0 - 399
PT-EX800T: Top to bottom
0 - 383