Table of Contents
Advertisement
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" (x page 96) for the operation of the menu screen.
[DIGITAL CINEMA REALITY]
The picture quality is enhanced by raising the vertical resolution higher performing the cinema processing when
interlace signal for moving image is input.
1)
Press as to select [DIGITAL CINEMA REALITY].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[30p FIXED]
[25p FIXED]
Note
f In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p
FIXED]. (Vertical resolution will degrade.)
f [DIGITAL CINEMA REALITY] is fixed to [OFF] in the following cases.
g When [FRAME RESPONSE] is set to [FAST]
f The [DIGITAL CINEMA REALITY] setting is disabled and fixed to [OFF] when [DIGITAL CINEMA REALITY] is set to anything other than
[OFF] and the following setting or operation is performed.
g Set [FRAME RESPONSE] to [FAST].
[BLANKING]
Adjust the blanking width if there is a noise at the edge of the screen or the image is slightly running out from the
screen.
1)
Press as to select [BLANKING].
2)
Press the <执行> button.
f The [BLANKING] adjustment screen is displayed.
3)
Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
f When [CUSTOM MASKING] is selected and set to anything other than [OFF] ([PC-1], [PC-2], [PC-3]),
the blanking width can be adjusted to arbitrary shape using a computer and the masking function of the
"Geometric & Setup Management Software". Up to three adjustment data can be saved.
4)
Press qw to adjust the blanking width.
Blanking correction
Top of the screen
Bottom of the
screen
Chapter 4 Settings — [ADVANCED MENU] menu
Automatically detects the input signal and performs cinema processing.
Does not perform cinema processing.
When 60 Hz vertical scanning
frequency signals are input
When 50 Hz vertical scanning
frequency signals are input
Item
Operation
Press q.
[UPPER]
Press w.
Press w.
[LOWER]
Press q.
Performs forced cinema processing (2:2 pulldown).
Adjustment
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves upward.
The blanking zone
moves downward.
Range of adjustment
Top and bottom 0 - 2398
ENGLISH - 119
Advertisement
Table of Contents
