Perform Engine Maintenance - Deutz And Continental Models; Inspect The Fuel Filter/Water Separator - Diesel Models - Genie S-80 Service Manual

February 2012
A-8
Perform Engine Maintenance -
Deutz and Continental Models
Engine specifications require that this one-time
procedure be performed after the first 50 hours of
operation.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures for
commissioning new and overhauled engines and
additional engine information are available in the
Deutz TD2011 Operation Manual
(Deutz part number 0312 3547) OR the
Continental TME27 Owner's Manual
(Continental part number WM10303).
Deutz TD2011 Operation Manual
Genie part number
Continental TME27 Owner's Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out away from the machine and secure it
from moving.
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
Part No. 122985
Section 3 • Scheduled Maintenance Procedures
A-9
Inspect the Fuel Filter/Water
Separator - Diesel Models
Note: Genie specifications require that this
procedure be performed every 100 hours or
monthly, whichever comes first.
Proper maintenance of the fuel filter/water separator
is essential for good engine performance. Failure to
perform this procedure can lead to poor engine
performance and/or hard starting, and continued
use may result in component damge. Extremely
dirty conditions may require this procedure be
performed more often.
139320
Note: Perform this procedure with the engine off.
Perkins Models:
111901
1 Put on protective clothing and eye wear.
2 Open the engine side turntable cover and locate
the fuel filter/water separator next to the
hydraulic return filter on the bulkhead.
3 Inspect the filter bowl for water buildup.
Result: If water is present in the filter bowl
continue with steps 4 through 8.
S-80 • S-85 • S-80X
CHECKLIST A PROCEDURES
Explosion and fire hazard. Engine
fuels are combustible. Perform this
procedure in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an approved
fire extinguisher within easy reach.
3 - 11