Genie S-80 Service Manual page 170

Section 5 • Fault Codes
FAULT CODES
Error Source
ID Name
31 Primary
Ext. / Ret.
Joystick
32 Primary
Ext. / Ret.
Directional
Valves
33 Primary
Ext. / Ret.
Flow
Valve
34 Ext. Ret.
Limit Switch
Cross Check
41 Turntable
Rotate
Joystick
5 - 4
Error Type
ID Name
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
21 Fault
12 Value too high
15 Value too low
17 Not calibrated
31 Invalid setup
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
S-80 • S-85 • S-80X
Condition
Function is
inoperative.
Alarm sounds
indicating a fault.
Valve is operating
outside of limits.
Alarm sounds
indicating a fault.
Valve is operating
outside of limits.
Alarm sounds
indicating a fault.
Normal function
except threshold
for one or both
directions is zero.
Limited speed
and direction
frozen at zero
and neutral.
Alarm sounds
indicating a fault.
February 2011
Solution
Cycle power off,
then on after
problem has been
corrected.
Calibrate joystick.
Cycle power off,
then on after
problem has been
correted.
Cycle power off,
then on after
problem has been
corrected.
Calibrate valve
threshold.
Cycle power off,
then on after
problem has been
corrected.
Calibrate joystick.
Part No. 122985