Performance Specifications; Hydraulic Oil Specifications - Genie S-80 Service Manual

Section 2 • Specifications
SPECIFICATIONS

Performance Specifications

Drive speed, maximum
Stowed position
RT Tires
Stowed position
Flotation Tires
Raised or extended position
Braking distance, maximum
High range on paved surface
Gradeability Refer to the Operator's Manual
Boom function speeds, maximum
from platform controls
Jib boom up (S-85)
Jib boom down (S-85)
Boom up (ANSI, CSA, AS models)
Boom up (CE models)
Boom down (ANSI, CSA, AS models) 61 to 69 seconds
Boom down (CE models)
Boom extend
Boom retract
Turntable rotate, 360°
boom fully stowed
Turntable rotate, 360°
boom raised or extended
Platform rotate, 160°
Platform level up
Platform level down
2 - 2

Hydraulic Oil Specifications

Hydraulic Oil Specifications
40 ft / 7.9-8.5 sec Hydraulic oil type
12.2 m / 7.9-8.5 sec Viscosity grade
Viscosity index
40 ft / 11-13 sec
12.2 m / 11-13 sec
Cleanliness level, minimum
40 ft / 40-45 sec
Water content, maximum
12.2 m / 40-45 sec
Chevron Rando HD MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
3 ft
designed to give maximum protection to hydraulic
90 cm
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
25 to 35 seconds
Optional fluids
15 to 25 seconds
Biodegradable
57 to 65 seconds
75 to 83 seconds
Fire resistant
Mineral based
75 to 83 seconds
59 to 67 seconds
57 to 65 seconds
95 to 103 seconds
210 to 250 seconds
8 to 12 seconds
50 to 60 seconds
40 to 50 seconds
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
S-80 • S-85 • S-80X
February 2012
Chevron Rando HD MV equivalent
Multi-viscosity
Petro Canada Environ MV46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Part No. 122985
200
15/13
200 ppm