Remove And Replace The Boom Extend/Retract Cables - Genie S-80 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST E PROCEDURES
E-4
Replace the Boom Extend/
Retract Cables
Genie specifications require that this procedure be
performed every 7 years.
The boom extend/retract cables are responsible for
the extension and retraction of the number 3 boom
tube. Replacement of the boom extend/retract
cables is essential to good machine performance
and safe machine operation. The boom extend/
retract functions should operate smoothly and be
free of hesitation, jerking and unusual noise.
1 Replace the boom extend/retract cables. See
Repair Procedure 4-5, How to Replace the
Boom Extend/Retract Cables.
3 - 60 S-80 • S-85 • S-80X
February 2012
Part No. 122985