Valve Coil Resistance Specifications - Genie S-80 Service Manual

Section 2 • Specifications
SPECIFICATIONS
Function manifold
System relief pressure
(measured at port)
PTEST
Boom down relief pressure
(measured at port)
PTEST
Boom extend relief pressure
(measured at port)
PTEST
Steer/axle extend
flow regulator
Oscillate relief pressure
Drive manifold
Hot oil relief pressure
Brake release pressure
Wheel drive hubs
Drive motors
Displacement per revolution, variable
(2 speed motor)
Hydraulic filters
High pressure filter
High pressure filter
bypass pressure
Medium pressure filter
Medium pressure filter
bypass pressure
Hydraulic tank
return filter
2 - 4
3200 psi
221 bar
2400 psi
165 bar
2400 psi
165 bar
3.5 gpm
13.2 L/min
950 psi
65.5 bar
280 psi
19.3 bar
240 psi
16.5 bar
0.9 to 2.7 cu in
14.7 to 45 cc
 200
Beta
3
102 psi
7 bar
 200
Beta
3
51 psi
3.5 bar
10 micron with
25 psi / 1.7 bar bypass
S-80 • S-85 • S-80X
Valve Coil Resistance
Specifications
Note: The following coil resistance specifications
are at an ambient temperature of 68°F / 20°C. As
valve coil resistance is sensitive to changes in air
temperature, the coil resistance will typically
increase or decrease by 4% for each 18°F / -7.8°C
that your air temperature increases or decreases
from 68°F / 20°C.

Valve coil resistance specifications

Proportional solenoid valve
(schematic items SE)
Proportional solenoid valve
(schematic items SR and SF)
2 position 3 way solenoid valve
(schematic items SJ)
2 position 3 way solenoid valve
(schematic items SK)
3 position 4 way solenoid valve
(schematic items SI and SL)
Solenoid valve, NO, Poppet
(schematic items SP and SQ)
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
February 2012
REV D
3.7 
4.8 
4.1 
9 
7.2 
5.6 
Part No. 122985