Genie S-80 Service Manual page 171

February 2011
Error Source
ID Name
42 Turntable
Rotate
Directional
Valves
43 Turntable
Rotate
Flow Valve
44 Drive Enable
Override
Switch
51 Drive Joystick
Part No. 122985
Error Type
ID Name
21 Fault
12 Value too high
15 Value too low
17 Not calibrated
21 Fault
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
S-80 • S-85 • S-80X
Condition
Limited direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Normal function
except threshold
for one or both
directions is zero.
Drive enable
override direction
is frozen at
neutral.
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Section 5 • Fault Codes
FAULT CODES
Solution
Cycle power off,
then on after
problem has been
corrected.
Cycle power off,
then on after
problem has been
correted.
Calibrate valve
threshold.
Cycle power off,
then on after
problem has been
corrected.
Cylcle power off,
then on after
problem has been
corrected.
Calibrate joystick.
Continued on next page
5 - 5