Genie S-80 Service Manual page 172

Section 5 • Fault Codes
FAULT CODES
Error Source
ID Name
53 Drive Flow
Valve (EDC)
54 Drive Brake
Valve
55 High Drive
Motor Speed
Valve
61 Steer Joystick
62 Steer
Directional
Valve
5 - 6
Error Type
ID Name
12 Value too high
15 Value too low
Frozen at zero
and neutral.
17 Not calibrated
21 Fault
21 Fault
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
21 Fault
S-80 • S-85 • S-80X
Condition
Limited speed
and direction.
problem has been
corrected.
Alarm sounds
indicating a fault.
Normal function
except threshold
for one or both
directions is zero.
Drive frozen
at zero and
neutral.
Alarm sounds
indicating a fault.
Motor speed
in the low state.
Alarm sounds
indicating a fault.
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
Limited speed
and direction.
Frozen at zero
and neutral.
Alarm sounds
indicating a fault.
February 2011
Solution
Cycle power off,
then on after
Calibrate valve
threshold.
Cycle power off,
then on after
problem has been
correted.
Cycle power off,
then on after
problem has been
corrected.
Cylcle power off,
then on after
problem has been
corrected.
Calibrate joystick.
Cycle power off,
then on after
problem has been
corrected.
Part No. 122985