Perform Engine Maintenance - Deutz Models; Perform Engine Maintenance - Ford Models - Genie S-40 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST A PROCEDURES
A-3
Perform Engine Maintenance -
Deutz Models
Engine specifications require that
this procedure be performed every
8 hours or daily, whichever comes
first.
Required maintenance procedures and additional
engine information are available in the Deutz 1011F
Operation Manual (Deutz part number 0297 9683)
or the Deutz 2011 Operation Manual (Deutz part
number 0297 9929)
Deutz 1011F Operation Manual
Genie part number
Deutz FL 2011 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
3 - 8
A-4
Perform Engine Maintenance -
Ford Models
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG 425 EFI Operator Handbook
Genie part number
52883
To access the engine:
84794
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Genie S-40 and Genie S-45
January 2005
Engine specifications require that
this procedure be performed daily
or every 8 hours, whichever comes
first.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
Part No. 102521
REV A
84792