Fuel And Hydraulic Tanks; Fuel Tank - Genie S-80 Service Manual

February 2012
9-1

Fuel Tank

How to Remove the Fuel Tank
Explosion and fire hazard. Engine
fuels are combustible. Remove the
fuel tank in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an
approved fire extinguisher within
easy reach.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
1 Turn the manual fuel shutoff valve to the
closed position (if equipped).
2 Remove the fuel filler cap from the tank.
3 Using an approved hand-operated pump, drain
the fuel tank into a suitable container. Refer to
capacity specifications.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and diesel fuel.
Part No. 122985

Fuel and Hydraulic Tanks

4 Tag, disconnect, drain and plug the supply and
return fuel hoses. Cap the fittings on the fuel
tank.
5 Remove the fuel tank retaining fasteners.
6 Remove the fuel tank from the machine.
Note: Clean the fuel tank and inspect for damage
before installing it onto the machine.
S-80 • S-85 • S-80X
Section 4 • Repair Procedures
Component damage hazard.
The fuel tank is plastic and may
become damaged if allowed to fall.
Component damage hazard.
When installing the plastic fuel
tank, do not overtighten the
retaining fasteners.
4 - 61