Hydraulic Component Specifications - Genie S-80 Service Manual

February 2012
Continued use of Chevron Aviation
A hydraulic oil when ambient
temperatures are consistently
above 32°F / 0°C may result in
component damage.
Note: Use Chevron Aviation A hydraulic oil when
ambient temperatures are consistently
below 0°F / -18°C.
Note: Use Shell Tellus T46 hydraulic oil when oil
temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Industries Service Department before use.
Part No. 122985
Hydraulic Component
Specifications
Drive pump
Type: bi-directional variable displacement piston pump
Displacement
Flow rate @ 2300 rpm
Drive pressure, maximum
Charge pump
Type:
Displacement
Flow rate @ 2300 rpm
Charge pressure @ 2300 rpm
Neutral position
Function pump
Type:
Displacement
Flow rate @ 2300 rpm
Auxiliary pump
Type:
Displacement - static
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
S-80 • S-85 • S-80X
Section 2 • Specifications
SPECIFICATIONS
0 to 2.8 cu in
0 to 46 cc
0 to 30.3 gpm
0 to 114.7 L/min
0.85 cu in
34.1 L/min
variable displacement piston pump
0 to 2.3 cu in
0 to 38 cc
0 to 23 gpm
0 to 87 L/min
fixed displacement gear pump
0.151 cu in
3750 psi
259 bar
gerotor
13.9 cc
9 gpm
310 psi
21.4 bar
2.47 cc
2 - 3