Machine Torque Specifications; Manifold Component Specifications - Genie S-80 Service Manual

Section 2 • Specifications
SPECIFICATIONS

Machine Torque Specifications

Platform rotator
1-8 center bolt, GR 5, lubricated
3
/ -16 bolts, GR 8
8
*(use blue thread locking compound)
Turntable rotate assembly
Rotate bearing mounting bolts, lubricated
Rotate drive hub mounting bolts, lubricated
Backlash plate mounting bolts, lubricated
Drive motor and hubs
Drive hub mounting bolts, dry
Drive hub mounting bolts, lubricated
*(use blue thread locking compound)
Drive motor mounting bolts, dry
Drive motor mounting bolts, lubricated
*(use blue thread locking compound)
Drive hub oil plug, O-ring seal
2 - 8
Manifold Component
Specifications
Plug torque
480 ft-lbs
651 Nm
SAE No. 2
35 ft-lbs*
SAE No. 4
47 Nm*
SAE No. 6
SAE No. 8
180 ft-lbs
244 Nm
SAE No. 10
80 ft-lbs
SAE No. 12
108 Nm
280 ft-lbs
379 Nm
210 ft-lbs
284 Nm
160 ft-lbs*
217 Nm
110 ft-lbs
149 Nm
80 ft-lbs*
108 Nm
13 ft-lbs
18 Nm
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
S-80 • S-85 • S-80X
February 2012
REV D
50 in-lbs / 6 Nm
14 ft-lbs / 18.9 Nm
23 ft-lbs / 31.2 Nm
36 ft-lbs / 48.8 Nm
62 ft-lbs / 84.1 Nm
84 ft-lbs / 113.9 Nm
Part No. 122985