Figure 23: Installing The Air Filter In A Services Gateway; Figure 24: Tightening The Air Filter Screw - Juniper SRX240 Hardware Manual
Hide thumbs
Also See for SRX240:
- Hardware manual (178 pages) ,
- Getting started manual (4 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Figure 23: Installing the Air Filter in a Services Gateway
Tighten the screw on the air filter to secure it in the chassis. See
5.
Figure 24: Tightening the Air Filter Screw
NOTE:
When you are inserting an air filter for the first time on the SRX240
Services Gateway High Memory with AC Power supply model, you must
remove the air filter cover by removing the screw on the cover using a number-1
Phillips screwdriver.
Maintaining the SRX240 Services Gateway Hardware Components on page 105
SRX240 Services Gateway Air Filter on page 24
Chapter 18: Replacing Cooling System Components
Figure 24 on page
123.
123
Advertisement
Table of Contents
Troubleshooting
