SRX240 Services Gateway Hardware Guide
Related
Documentation
SRX240 Services Gateway Air Filter
Related
Documentation
24
SRX240 Services Gateway Chassis on page 31
SRX240 Services Gateway Front Panel and Back Panel Views on page 13
SRX240 Services Gateway Built-In Interfaces on page 16
SRX240 Services Gateway LEDs on page 18
SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 10
SRX240 Services Gateway Power Supply on page 25
The air filter for the SRX240 Services Gateway (both with AC power supply models and
with DC power supply models) is hot-insertable and hot-removable. The air intake opening
is at the right side of the chassis (when the chassis is viewed from the front side). The
air filter weighs approximately 0.2 lbs (0.09 kg). To ensure optimal operation, you must
replace the air filter periodically (every six months).
NOTE:
An air filter is not shipped with the SRX240 Services Gateway with
AC power supply model. To meet NEBS requirements, you must order the air
filter separately and install it. Contact your Juniper Networks customer service
representative for more information.
Replacing the Air Filter on the SRX240 Services Gateway on page 121
SRX240 Services Gateway Chassis on page 31
SRX240 Services Gateway Front Panel and Back Panel Views on page 13
SRX240 Services Gateway LEDs on page 18
SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 10
SRX240 Services Gateway Power Supply on page 25
Copyright © 2015, Juniper Networks, Inc.