Juniper SRX240 Hardware Manual page 74

SRX240 Services Gateway Hardware Guide
Related
Documentation
56
Use a number–2 Phillips screwdriver to install the screws that secure the mounting
2.
brackets to the chassis.
Have one person grasp the sides of the device, lift it, and position it in the rack.
3.
Align the bottom hole in each mounting bracket with a hole in each rack rail, making
4.
sure the chassis is level.
Have a second person install a mounting screw into each of the two aligned holes.
5.
Use a number–3 Phillips screwdriver to tighten the screws.
Install the second screw in each mounting bracket.
6.
Verify that the mounting screws on one side of the rack are aligned with the mounting
7.
screws on the opposite side and that the device is level.
Preparing the SRX240 Services Gateway for Installation on page 53
Required Tools and Parts for Installing and Maintaining the SRX240 Services Gateway
on page 48
Copyright © 2015, Juniper Networks, Inc.