Installation Overview; Installation Overview For The Srx240 Services Gateway; Figure 1: Srx240 Services Gateway; Table 27: Installation Process Sequence For The Srx240 Services Gateway - Juniper SRX240 Hardware Manual

CHAPTER 9

Installation Overview

Installation Overview for the SRX240 Services Gateway

Copyright © 2015, Juniper Networks, Inc.
Installation Overview for the SRX240 Services Gateway on page 47
Required Tools and Parts for Installing and Maintaining the SRX240 Services
Gateway on page 48
SRX240 Services Gateway Autoinstallation Overview on page 49
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 27 on page 47.

Table 27: Installation Process Sequence for the SRX240 Services Gateway

Steps Process
1 Review the safety guidelines.
2 Verify that you have prepared your site
for the installation of the services
gateway using the checklist.
3 Unpack the services gateway and verify
that the parts are received.
4 Prepare the services gateway for
installation.
5 Install the services gateway.
For More Information
"SRX240 Services Gateway Safety
Requirements, Warnings, and
Guidelines" on page 139
"Site Preparation Checklist for the
SRX240 Services Gateway" on page 29
"Unpacking the SRX240 Services
Gateway" on page 51
"Preparing the SRX240 Services
Gateway for Installation" on page 53
"Installing the SRX240 Services
Gateway" on page 53
47