Configuring PoE Functionality on the SRX240 Services Gateway
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
SRX240 Services Gateway Secure Web Access Overview on page 84
To enable the PoE feature support on your SRX240 Services Gateway, you must configure
the services gateway.
You can configure PoE using the CLI configuration editor.
For more details on configuring PoE, see the JUNOS Software Interfaces and Routing
Configuration Guide.
SRX240 Services Gateway Description on page 3
SRX240 Services Gateway Chassis on page 31
SRX240 Services Gateway Front Panel and Back Panel Views on page 13
SRX240 Services Gateway Built-In Interfaces on page 16
SRX240 Services Gateway LEDs on page 18
Mini-Physical Interface Modules for the SRX240 Services Gateway on page 9
Chapter 15: Performing Initial Configuration
101