Cable Specifications And Pinouts; Interface Cable And Wire Specifications For The Srx240 Services Gateway; Rj-45 Connector Pinouts For The Srx240 Services Gateway Ethernet Port; Figure 10: Ethernet Cable Connector (Rj-45) - Juniper SRX240 Hardware Manual

CHAPTER 8

Cable Specifications and Pinouts

Interface Cable and Wire Specifications for the SRX240 Services Gateway

Related
Documentation

RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port

Copyright © 2015, Juniper Networks, Inc.
Interface Cable and Wire Specifications for the SRX240 Services Gateway on page 41
RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port on page 41
RJ-45 Connector Pinouts for the SRX240 Services Gateway Console Port on page 43
Table 23 on page 41 lists the specifications for the cables that connect to ports.

Table 23: Cable and Wire Specifications for Ports

Port Cable Specification
Console RS-232 (EIA-232) serial
port cable
Ethernet CAT-5e (Category 5)
port cable or equivalent
suitable for 100BASE-T
operation
RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port on page 41
RJ-45 Connector Pinouts for the SRX240 Services Gateway Console Port on page 43
Figure 10 on page 41 shows the RJ-45 cable connector pinouts for Ethernet ports.

Figure 10: Ethernet Cable Connector (RJ-45)

Table 24 on page 42 describes the RJ-45 connector pinouts for the Ethernet port for
10/100 Mbps.
Maximum
Cable/Wire Required Length
One 6-ft (1.83-m) length 6 ft (1.83 m)
with DB-9/RJ-45
connectors
One 15-ft (4.57-m) 328 ft
length with RJ-45/RJ-45 (100 m)
connectors
Device
Receptacle
RJ-45
RJ-45
41