Changing The Reset Config Button Behavior On The Srx240 Services; Gateway; Juniper Networks Technical Assistance Center - Juniper SRX240 Hardware Manual

SRX240 Services Gateway Hardware Guide
Changing the Reset Config Button Behavior on the SRX240 Services Gateway
Related
Documentation

Juniper Networks Technical Assistance Center

Related
Documentation
118
You can change the default operation of the RESET CONFIG button by limiting how the
button resets the services gateway:
To prevent the RESET CONFIG button from setting the device to the factory-default
configuration and deleting all other configurations:
admin@host# set chassis config-button no-clear
You can still press and quickly release the button to reset it to the rescue configuration.
To prevent the RESET CONFIG button from setting the device to the rescue
configuration:
admin@host# set chassis config-button no-rescue
You can still press and hold the button for 15 seconds or more to reset the gateway to
the factory-default configuration.
To disable the button and prevent the device from resetting to either configuration:
admin@host# set chassis config-button no-clear no-rescue
The no-clear option prevents the RESET CONFIG button from deleting all configurations
on the services gateway. The no-rescue option prevents the RESET CONFIG button from
loading the rescue configuration.
To return the function of the RESET CONFIG button to its default behavior, remove the
config-button statement from the device configuration.
Monitoring the SRX240 Services Gateway Chassis Using the CLI on page 111
Monitoring the SRX240 Services Gateway Components Using LEDs on page 107
SRX240 Services Gateway LEDs on page 18
Loading the Rescue Configuration on the SRX240 Services Gateway on page 117
If you need assistance while troubleshooting a services gateway, open a support case
using the Case Manager link at
(within the United States) or 1-408-745-9500 (from outside the United States).
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 127
http://www.juniper.net/support/
Copyright © 2015, Juniper Networks, Inc.
, or call 1-888-314-JTAC