CHAPTER 11
Installing the Services Gateway
Preparing the SRX240 Services Gateway for Installation
Related
Documentation
Installing the SRX240 Services Gateway
Copyright © 2015, Juniper Networks, Inc.
Preparing the SRX240 Services Gateway for Installation on page 53
Installing the SRX240 Services Gateway on page 53
You can mount an SRX240 Services Gateway in a rack. The services gateway can be
mounted on four-post (telco) racks, enclosed cabinets, and open-frame racks.
Table 31: SRX240 Services Gateway Preinstallation Checklist
Task
Verify that the installation site meets the
requirements.
Remove the services gateway chassis from
the shipping carton.
Verify the parts you have received.
General Site Guidelines for Installing the SRX240 Services Gateway on page 30
Unpacking the SRX240 Services Gateway on page 51
Verifying Parts Received with the SRX240 Services Gateway on page 51
Installing the SRX240 Services Gateway on page 53
You can front-mount or center-mount the SRX240 Services Gateway in a rack.
NOTE:
If you are installing multiple devices in one rack, install the lowest one
first and proceed upward in the rack.
Additional Information
"General Site Guidelines for Installing the SRX240
Services Gateway" on page 30
"Unpacking the SRX240 Services Gateway" on
page 51
"Verifying Parts Received with the SRX240 Services
Gateway" on page 51
53