Changing The User Parameters - Ricoh C9020L Operating Instructions Manual

Switch: 20, Bit: 5, 4, 3, 2
Reprinting time of stored documents in memory that could not be printed using LAN-Fax Driver
• 0000: 0 minutes
• 0001: 1 minute
• 0010: 2 minutes
• 0011: 3 minutes
• 0100: 4 minutes
• 0101: 5 minutes
• 0110: 6 minutes
• 0111: 7 minutes
• 1000: 8 minutes
• 1001: 9 minutes
• 1010: 10 minutes
• 1011: 11 minutes
• 1100: 12 minutes
• 1101: 13 minutes
• 1110: 14 minutes
• 1111: 15 minutes
Switch: 22, Bit: 0
Detect a dial tone before sending faxes when using the telephone line
• 0: Not detect (Off)
• 1: Detect (On)

Changing the User Parameters

This section describes how to set parameters.
• Access to some User Parameter Setting may require options, or other settings may need to be made
beforehand.
• It is recommended that you print and store the "Parameter Settings List" when you program or change
parameter settings.
• Do not change any bit switches other than those shown on the previous pages.
Parameter Settings
6
171