Ricoh C9020L Operating Instructions Manual page 457

3. Date
Shows the transmission or reception date.
4. Time
Shows the transmission or reception start time.
5. Destination
Shows the name (for display) programmed by the other end.
Shows the programmed fax number if the name (for display) was not programmed.
If neither name nor fax number was programmed by the other end, an entered fax number or a name programmed
in a destination list is shown for transmissions.
6. Communication mode
After "G3", "T" for outgoing faxes or "R" for incoming faxes, and the communication mode appear in
alphabetical letters or symbols.
7. Communication time
Shows time taken for transmissions or receptions.
8. Number of pages
Shows the number of pages transmitted or received.
9. Communication result
Shows the result of transmissions or receptions.
OK: All pages were properly transmitted or received.
--: When using LAN-Fax, the results of communication from a computer to this machine are shown.
E: A communication error occurred.
D: Power was disconnected during communication. Not all fax documents were transmitted.
10. User name
Shows the sender's name.
11. File number
Shows file management numbers.
• To prioritize a fax number or name programmed in the destination list, contact your service
representative.
Printing the Journal
4
127