Info; Ipp - Ricoh C9020L Operating Instructions Manual

Netmask configuration
msh> ifconfig "interface_name" netmask "address"
The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface.
msh> ifconfig ether netmask 255.255.255.0
Broadcast address configuration
msh> ifconfig "interface_name" broadcast "address"
Changing the interface
msh> ifconfig "interface" up
• To get the above addresses, contact your network administrator.
• Use the default configuration if you cannot obtain setting addresses.
• The IP address, subnet mask and broadcast address are the same as that for the Ethernet interface.
• Use "0x" as the initial two letters of a hexadecimal address.

info

Use the "info" command to display printer information such as paper tray, output tray, and printer language.
Printer information display
msh> info
• p.154 "Understanding the Displayed Information"

ipp

Use the "ipp" command to view and configure IPP settings.
Viewing settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30-65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is "off".
Remote Maintenance by telnet
4
121