Ricoh C9020L Operating Instructions Manual page 157

Problem
The display is off.
Nothing happens when the
operation switch is turned on.
"Please wait." appears.
"Please wait." appears.
"Please wait." appears.
"Adjusting..." appears.
The user code entry screen is
displayed.
The Authentication screen
appears.
"Authentication has failed."
appears.
Cause
The operation switch is turned
off.
The main power switch is
turned off.
This message appears when
you turn on the operation
switch.
This message appears when
the machine is warning up.
This message appears when
you change the toner
cartridge.
The machine is performing
image adjustment
operations.
Users are restricted by User
Code Authentication.
Basic Authentication,
Windows Authentication,
LDAP Authentication or
Integration Server
Authentication is set.
The entered login user name
or login password is not
correct.
When You Have Problems Operating the Machine
Solution
Turn on the operation switch.
Turn on the main power switch.
Wait for a while. If the machine does not
get ready in a minute, contact your
service representative.
• Wait for a while. If the machine
does not get ready in a couple of
minutes, contact your service
representative.
• Wait until the message disappears.
Do not turn off the main power
switch while the message is
showing.
Wait for a while. If the message does not
disappear in two minutes, contact your
service representative.
The machine may perform periodic
maintenance during operations. The
frequency and duration of maintenance
depends on the humidity, temperature,
and printing factors such as number of
prints, paper size, and paper type. Wait
for the machine to get ready.
Enter the user code (up to eight digits),
and then press the [OK] key.
Enter your login user name and user
password. See "When the
Authentication Screen is Displayed",
About This Machine
Inquire the user administrator for the
correct login user name and login
password.
1
.
15