Ricoh C9020L Operating Instructions Manual page 706

1. System Settings
• Server Name
• Search Base
• Port No.
1
• SSL (Use Secure Connection)
• Authentication
• User name
• Password
• Realm name
• Search Conditions
• Search Options
To start an LDAP search, make sure that the items listed below are set. For other items, check your
environment and make any necessary changes.
This function supports LDAP Version 2.0 and 3.0.
To use the LDAP server, select [On] under LDAP Search.
For details about how to program the LDAP Server, see "Programming the LDAP server".
LDAP Search
You can specify whether or not to use the LDAP server for searching.
The default setting is [Off].
If you select [Off], LDAP server list will not appear on the searching display.
Prog. /Change/Delete Realm
You can program the realm to be used for Kerberos authentication.
• Realm Name
• KDC Server Name
• Domain Name
Be sure to set both the realm name and KDC server name when programming a realm.
For details about [Prog./Change/Delete Realm], see "Programming the Realm".
AOF (Always On)
You can specify whether or not to use Auto Off.
The default setting is [On].
Energy Saver Level
You can specify the level for the Energy Saver mode.
When it is set to [Level 1], the machine recovers from energy saver mode to normal mode and become
ready to make copy in about 3 seconds.
36