Redial - Ricoh C9020L Operating Instructions Manual

1. Transmission
• p.56 "Programming Destinations from Check Destination Screen"
1

Redial

The machine stores the latest destinations specified for each transmission method.
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination again.
• The following kinds of destinations are not stored:
• Destinations specified using the destination list
• Destinations specified as a group destination
• Destinations dialed using the optional handset or the external telephone
• Destinations dialed by Redial (regarded as already stored in memory)
• Second and later destinations broadcasted to
• Destinations specified in the LAN-Fax Driver on the computer
• To redial a fax number, do not dial any numbers before you press the [Pause/Redial] key. If you press
the [Pause/Redial] key after entering numbers using the number keys, a pause is entered instead.
1. Place the original, and then select the scan settings you require.
2. Press the [Pause/Redial] key.
3. Select the destination you want to redial to using [ ] or [ ], and then press the [OK] key.
46
BKQ031S